• Only 1" thick, this truly is a slim radiator.
  
• With eight mounting points, you have the mounting flexibility to have the water inlet and outlet on either side.
  
• All aluminum construction provides optimum cooling efficiency with water or antifreeze/coolant.
• Water inlet and outlet are 1/2" NPT female threads, just like most water-to-air intercoolers.
• These radiators ship with a radiator cap on top and a drain plug on the bottom.
• These radiators feature a 1/8-27 NPT tap that would allow you to install a temperature sending unit. They ship with a plug installed in case you do not wish to use this feature.
• These can be used for up to 1200 HP.

The intercooler (12.25"X12.25"X4.5" Bend Inlet/Outlet)

• 100% Lightweight aluminum - No epoxy used in core
• Show quality mirror polish finish
• Recommended for over 700 CFM
• Pressure Drop: Less than 0.1 PSI. This is not a typo! Liquid/Air Intercoolers have incredibly low pressure drop.
• Air Inlet/Outlet: 3.0"
• Water Inlet/Outlet: 1/2" NPT
• Maximum water/air pressure: 70 PSI
• This intercooler has the inlet and outlet on the OPPOSITE SIDES.

• The unique fan blade design allows you to pull or push air with the same velocity. The motor is easily reversible for any application. Most other fans are designed for one-way air flow.
  
  
• Many aftermarket fans don't include all the mounting hardware needed. Our fan kits include the mounting feet AND the through-radiator mounting ties (that sell for $5-$7 at most auto parts stores).
• Our 10" fans have TEN points for the mounting feet giving you flexible installation options.
• These truly are slim fans. They measure only 2.5" at the deepest point, making them ideal for cramped areas.
• Additional Specs: 12-15V, 4 Amps, 1250 CFM

This is a new Bosch water-to-air intercooler pump specifically designed for circulating water in water-to-air intercoolers.

Most sellers of this pump don't include the $20 harness. We sell them WITH the wiring harness that gives you positive and negative wires to connect the pump electrically.

This Bosch pump is part number 0 392 022 002 and is commonly used in supercharged Mustangs and Mercedes.

This is a new OEM pump, but it ships with no documentation. If you need more information about this pump, please check the Bosch web site.

These Ice Box Reservoirs are perfect for drag racing with a Water to Air Intercooler.

By plumbing this in to the water system of your Water to Air Intercooler and adding ice, it is possible to get intake temperatures BELOW ambient air, resulting in tremendous power gains. And because the water system is separate from the air system, you can mount this Ice Box Reservoir anywhere in the vehicle, including the trunk, passenger floor, back seat, or bed of a truck, without hurting performance.

Comes with four ports on the front for high versitility. We recommend using one of the top ports for the water return line (from the outlet on the intercooler) and the bottom port for the feed line (to the inlet of the pump). The middle port can be left plugged or used for an in-tank pump or sensor. All four ports come with screw-in, removable anodized plugs installed, allowing you to use any number of the ports or use this as a simple storage tank.

The Remote Radiator Filler Cap:

These remote radiator filler caps are perfect for water to air intercooler applications or other custom radiator installations.

Simple in design, the 3/4" barbed fittings are removable in case you need to install your own fittings in the 1/2" NPT Female threads.

The overflow tank nozzle is also removable in case you do not need an overflow tank. For water to air intercooler applications, it is common to either install a plug instead of the overflow tank nozzle or cap it.